small electric heating plate

Produktanwendungen

Home appliances: coffee cup heater, portable health pot, mini electric cooker, desktop insulation pad.

Industrial equipment: laboratory micro heating table, medical equipment constant temperature accessories, electronic equipment thermal management module.

Product parameters​​

Leistungsbereich:

Conventional models​​: 200W–800W (suitable for coffee cups, portable health pots, mini electric cookers).

Ultra-low power consumption models​​: 100W–200W (constant temperature heating for laboratories/medical equipment).

Customizable: Supports power adjustment on demand (voltage and load requirements must be provided).

Betriebsspannung:

Standard voltage​​: 110V/220V single-phase AC (global power grid compatible, error ≤±5%).

Low voltage adaptation​​: 12V/24V DC (suitable for vehicle/outdoor power supply).

Resistance value​​:

Conventional models​​: 10Ω–30Ω (matched by power and voltage, error ≤±3%).

Arbeitstemperatur:

Continuous stability​​: 60°C–150°C (surface temperature, high temperature resistant coating protection).

Short-term peak value​​: 200°C (need to customize ceramic fiber insulation layer).
​​Material:
​​Base material: aviation-grade aluminum alloy 6063-T5 (thermal conductivity ≥ 200W/m·K, lightweight design).
​​Surface treatment: Teflon (PTFE, anti-adhesion) or anodized layer (corrosion resistant).
Abmessungen:
​​Diameter/side length: Φ50mm–Φ100mm (round/square design).
​​Thickness: 1.5mm–3mm (ultra-thin embedded, suitable for mini appliances).
​​Service life:
​​Conventional model: 8,000–12,000 hours (based on daily usage frequency).
​​Ultra-low power consumption model: 12,000–15,000 hours (low-load operation).

Core advantages of the product

​​Extremely lightweight:
​​The aluminum alloy base material has a density of 2.7g/cm³, which is 50% lighter than stainless steel and is suitable for portable devices (such as camping cups and mini health pots).
​​Precise temperature control:
Supports PID algorithm temperature control (±1°C accuracy), suitable for constant temperature coffee cups, laboratory constant temperature baths and other scenarios.
Sicherheit und Verbrühungsschutz:
The surface temperature of the Teflon coating is ≤45°C (anti-scalding design), which complies with FDA food contact certification.
​​Efficient thermal conductivity:
The thermal conductivity of aluminum alloy is 200W/m·K, and it heats up to 60°C within 3 minutes, and the energy consumption is 25% lower than that of traditional resistance wire.
​​Multi-scenario adaptation:
Supports 12V/24V DC input, suitable for vehicle power supply, solar power supply system and outdoor portable equipment.
​​Ultra-thin design:
The thickness is only 1.5mm-3mm, seamlessly embedded in the bottom of a special-shaped cup or a small container, with a thermal efficiency of more than 90%.