Aluminum Kettle Heating Plate – Lightweight and fast heating solution
The high-efficiency aluminum heating element designed for home, commercial and outdoor scenes is suitable for 800W-2500W power range, thermal conductivity ≥237W/m·K, temperature resistance up to 300℃ (short time), thermal response time ≤12 seconds; integrated PID dynamic temperature control algorithm (±0.5℃ accuracy), supports anti-dry burning protection (＞10 seconds automatic power off) and pulse steam self-cleaning technology (scale removal rate ＞90%), passed CE/LFGB/RoHS certification, 40% lighter than traditional stainless steel heating plates, and life span ＞120,000 cycles. It is suitable for home fast heating, commercial multi-kettle parallel connection and outdoor emergency scenes, and supports stable operation in extreme environments (-20℃~450℃).
MOQ：1000PCS
Lead time：25days
Factory location: Zhongshan, Guangdong, China
Home appliances: household electric kettles, instant hot water dispensers, health kettles, portable travel kettles.
Industrial equipment: commercial water boilers, hotel/hospital constant temperature kettles, laboratory high temperature cleaning equipment.
Power range:
Conventional models: 800W–2200W (suitable for ordinary electric kettles and health kettles).
High-power models: 2200W–3000W (commercial-grade fast-boiling kettles).
Customizable: Supports on-demand power adjustment (voltage and load requirements must be provided).
Working voltage:
Standard voltage: 110V/220V single-phase AC (global power grid compatible, error ≤±5%).
Resistance value:
Conventional models: 5Ω–15Ω (matched by power and voltage, error ≤±3%).
Working temperature:
Continuous stability: 200°C–300°C (surface temperature, high-temperature resistant coating protection).
Short-term peak: 350°C (need to customize ceramic fiber insulation layer).
Material:
Aviation-grade aluminum alloy 6063-T5, thermal conductivity ≥ 200W/m·K, lightweight design, is the base material.
Surface treatment options include Teflon (PTFE, anti-adhesion) or anodized layer (thickness 15μm, corrosion-resistant).
Dimensions:
Diameter/side length: Φ80mm–Φ200mm (round/square design).
Thickness: 3mm–8mm (adapted to embedded pot bottom design).
Service life:
Conventional model: 10,000–15,000 hours (based on daily usage frequency).
High-power model: 15,000–20,000 hours (enhanced heat dissipation and coating protection).
High-efficiency thermal conductivity:
With a thermal conductivity of up to 200W/m·K, the aluminum alloy base material heats up to 100°C in 3 minutes and uses 15% less energy than conventional iron-chromium-aluminum heaters.
Precise temperature control:
Supports PID algorithm temperature control (±1°C accuracy), suitable for the constant temperature mode of smart health kettle (such as making tea, mixing milk powder).
Safe and durable:
The anodized layer is resistant to salt spray corrosion (test ≥500 hours), with a lifespan extended by 30%, suitable for humid kitchen environments.
Quick response:
No thermal inertia design, cools to a safe temperature within 30 seconds after power failure, and is suitable for high-frequency start-stop scenarios (such as continuous boiling water).
Easy to clean design:
Teflon coating resists scale/tea stain adhesion, reduces cleaning frequency by 60%, and complies with FDA food contact certification.
Lightweight adaptation:
The substrate density is 2.7g/cm³, which is 40% lighter than stainless steel, and is suitable for embedded small appliance design.
If you can provide accurate demand parameter information, we can give you a quote within 24 hours at the earliest.
These are lists of frequently asked questions by our customers. We correspond each question to a brief answer, covering aspects such as products, quality, and services. If you have other inquiries, please leave a message for consultation. Thank you.
Get a custom quote in less than two days.
