When your Whirlpool dryer not heating becomes a problem, you might feel frustrated. Always unplug the dryer before you begin any inspection or repair. You can address many Whirlpool dryer heating issues with basic tools at home. Whirlpool designs these appliances for reliability, but even the best machines can develop problems. Take your time and work carefully to restore proper function to your dryer.
Tip: Safety comes first—never skip unplugging your Whirlpool dryer before checking any components.
Common Reasons Your Whirlpool Dryer Isn’t Heating
When your Whirlpool dryer stops heating, you face a common household problem. Several components can fail or malfunction, leading to heating issues. Understanding these causes helps you troubleshoot and fix your dryer efficiently.
Faulty Whirlpool Dryer Heating Element
The Whirlpool dryer bộ phận làm nóng plays a crucial role in generating the heat needed to dry your clothes. If this part burns out or develops a fault, your dryer will only blow cool air. Many appliance repair statistics point to the heating element as a frequent source of heating problems. You may notice your clothes remain damp after a full cycle, even though the drum spins normally.
- The heating element can fail due to age, electrical surges, or repeated overheating.
- Short circuits in the heating element may cause continuous heating, which can lead to further damage.
- Testing the Whirlpool dryer heating element with a multimeter helps confirm if it needs replacement.
Note: While the heating element is a common culprit, you should also check other components to avoid unnecessary part replacements.
Blown Thermal Fuse
MỘT blown thermal fuse is another leading cause of Whirlpool dryer heating issues. The thermal fuse acts as a safety device, cutting power to the heating element if the dryer overheats. When this fuse blows, your dryer may run but will not produce heat. Sometimes, the dryer will not start at all.
Common symptoms of a blown thermal fuse include:
- The dryer drum turns, but no heat is produced.
- Các dryer may not turn on, even if you press the start button.
- Clothes remain wet after a complete drying cycle.
A blown thermal fuse often signals an underlying problem, such as blocked ventilation or a malfunctioning thermostat. Replacing the fuse without addressing the root cause may lead to repeated failures.
Malfunctioning Thermostat
Thermostats regulate the temperature inside your Whirlpool dryer. If a thermostat fails, your dryer may not reach the correct temperature or may overheat. The high-limit thermostat shuts off the heating element if the dryer gets too hot, while the cycling thermostat turns the heating element on and off to maintain proper temperature.
- A defective cycling thermostat may prevent the heating element from activating, resulting in no heat.
- A faulty high-limit thermostat can shut off the heating element too soon, causing poor drying performance.
- Testing both thermostats with a multimeter ensures they function correctly.
Tip: Proper thermostat operation is essential for safe and efficient dryer performance. If you suspect a thermostat issue, consider professional testing and replacement.
You can see that most Whirlpool dryer heating issues stem from a handful of components. By understanding these common causes, you can take the right steps to restore your dryer’s performance.
Power Supply Issues
You may overlook power supply problems when your Whirlpool dryer stops heating, but these issues often cause heating failures. Even if your dryer runs, it might not heat if it does not receive the correct voltage. Whirlpool dryers require a 240-volt supply to operate the heating element. If the supply drops, the dryer will spin but fail to produce heat.
Common power supply issues include:
- The dryer runs but does not heat, which often points to a voltage problem.
- Voltage testing at the heater relay may show only about 14 volts on the L2 line instead of the expected 120 volts.
- This low voltage usually signals a household electrical supply issue, not a fault inside the dryer.
- Blown fuses, tripped breakers, or wiring problems can disrupt the 240V supply needed for proper operation.
Tip: Always check your circuit breaker and household wiring before replacing any dryer parts. Insufficient voltage at the heater relay means you should address the power supply first.
If you confirm the power supply is stable, you can move on to other possible causes. Whirlpool recommends checking the centrifugal switch as well, but most heating failures start with a simple voltage check.
Blocked Ventilation
Blocked ventilation creates serious problems for your dryer’s efficiency and safety. When airflow becomes restricted, hot air and moisture remain trapped inside the drum. This leads to longer drying times and higher energy bills. You may notice your clothes take much longer to dry, or the dryer feels unusually hot on the outside.
Blocked vents can cause:
- Overheating, which increases the risk of fire from lint ignition.
- Damage to internal components and clothing due to excess heat and moisture.
- Burning smells, excessive heat around the dryer, and lint buildup.
- Moldy odors and visible lint accumulation near the vent opening.
Proper installation and regular maintenance help prevent these issues. Use approved vent materials like rigid metal or flexible aluminum, and minimize bends in the ductwork. Clean the lint trap after every load and schedule vent cleaning at least once a year.
Note: Regular cleaning and correct vent installation keep your Whirlpool dryer running safely and efficiently. Ignoring ventilation can lead to costly repairs and safety hazards.
Defective Timer or Control Board
A defective timer or control board can prevent your Whirlpool dryer from heating or running correctly. These components manage the dryer’s cycles and heating functions. When they fail, you may see several warning signs.
Look for these symptoms:
- Các control board receives power and blinks, but the display does not light up.
- Selector buttons on the interface panel may stop responding or behave unpredictably.
- Burn marks on the underside of the control board indicate physical damage.
- If the timer counts down but the dryer does not start, the issue may involve the timer or another component like the belt switch.
- Sometimes, replacing the control board does not fix the problem, which suggests another part may be at fault.
You should inspect the main relay control board, usually located above the drum, for visible damage. If you confirm power reaches the board but the display remains dark, the board likely needs replacement.
Callout: If you suspect a control board or timer failure, consider professional diagnosis. These repairs require technical skill and specialized tools.
How to Troubleshoot a Whirlpool Dryer That Won’t Heat
When your Whirlpool dryer stops heating, you can often resolve the issue with a systematic troubleshooting approach. By following these steps, you can identify the root cause and decide whether you need to repair or replace a component.
Check the Power Supply
Inspect Circuit Breakers
Start your troubleshooting by checking the circuit breakers. Whirlpool dryers require a dedicated 240-volt circuit. If one breaker trips, the dryer drum may spin, but the heating element will not receive power. Locate your electrical panel and inspect the breakers labeled for the laundry area. Reset any tripped breakers by switching them off and then on again.
Confirm Proper Voltage
After confirming the breakers, verify that your dryer receives the correct voltage. Use a multimeter to check the outlet. You should see a reading close to 240 volts. If the voltage is too low, the heating element cannot function. In this case, contact a licensed electrician to address the power supply issue before continuing with other troubleshooting steps.
Examine the Heating Element
Visual Inspection Steps
Next, inspect the Whirlpool dryer heating element. Unplug the dryer to ensure safety. Use a putty knife to release the two hidden metal spring clips between the top and front panels. Lift the top panel and locate the heating element assembly in the back left corner. Look for visible signs of damage, such as breaks or burn marks on the heating element.
How to Test with a Multimeter
For a more accurate diagnosis, perform a Whirlpool dryer heating element test using a multimeter. Disconnect the two wires from the heating element terminals. Set your multimeter to the lowest resistance setting. Touch the probes to each terminal. If the multimeter shows continuity, the heating element is in good condition. No continuity means the heating element is faulty and requires replacement. These heating element troubleshooting tips help you confirm the source of the problem.
Test the Thermal Fuse and Thermostats
Locating the Components
You will find the thermal fuse and thermostats mounted on the blower housing or near the heating element. Refer to your Whirlpool dryer manual for exact locations. Remove or isolate each component before testing.
Kiểm tra tính liên tục
Set your multimeter to the continuity or lowest resistance setting. Touch the leads to the terminals of the thermal fuse or thermostat. A beep or zero Ohms reading indicates the component is intact. No continuity means the part is blown or defective and must be replaced. This step ensures that the thermal fuse or thermostat is not preventing your dryer from heating. Cleaning the lint filter and vent regularly also helps prevent overheating and future failures.
Tip: Always unplug your Whirlpool dryer before performing any tests or repairs to avoid electrical shock.
By following these troubleshooting steps, you can efficiently diagnose most Whirlpool dryer heating issues and restore your appliance’s performance.
Inspect Dryer Ventilation
Proper dryer ventilation ensures safe and efficient operation. When you address heating issues, you must not overlook the vent system. Blocked vents can cause overheating, longer drying times, and even fire hazards. Regular inspection and cleaning form a crucial part of your troubleshooting process.
Checking for Blockages
You should inspect your dryer’s ventilation system for blockages as part of routine troubleshooting. Lint, dust, and even animal nests can accumulate in the vent, restricting airflow and reducing performance. Follow these best practices to check for obstructions:
- Clean the lint filter after every load. This simple habit prevents lint buildup and reduces fire risk.
- Replace accordion-style ducts with rigid metal ducts. Rigid ducts collect less lint and lower the chance of fire.
- Disconnect the dryer from power. If you have a gas dryer, turn off the gas valve before inspection.
- Carefully slide the dryer away from the wall. This step gives you access to the vent at the back.
- Inspect the vent opening outside your home. Remove any visible obstructions, such as animal nests or debris.
- Check for signs of blockage. Longer drying times or weak exhaust airflow outside often indicate a clogged vent.
Tip: If you notice lint around the floor or back of the dryer cabinet, clean these areas as well. Airflow pulls lint from these spots into the dryer.
Cleaning the Vent
Once you identify a blockage, you need to clean the vent thoroughly. Proper cleaning improves dryer efficiency and extends the life of your appliance. Use the following steps for effective vent cleaning:
- Locate and open the exterior vent outside your home.
- Remove large pieces of lint by hand. Use a dryer cleaning brush or a vacuum hose to clear remaining lint inside the ductwork.
- Use tools like a flexible brush with an extendable wand, an air compressor, or a vacuum cleaner with a long hose for deep cleaning.
- Reattach the vent securely to the dryer using clamps or tape.
- Plug the dryer back in. If you use a gas dryer, turn the gas valve back on.
- Run the dryer empty for 10-15 minutes. This step clears out any residual dust or lint.
- Clean the dryer vent and ducts at least once every two years. If you notice a decline in drying performance, increase the cleaning frequency.
Note: If you find the cleaning process complicated or the vent system difficult to access, consider hiring a professional. Professional cleaning ensures thorough removal of blockages and supports safe dryer operation.
Regular inspection and cleaning of your dryer’s ventilation system play a vital role in troubleshooting heating problems. These steps help you maintain optimal performance and reduce the risk of future issues.
How to Replace Heating Element in a Whirlpool Dryer
Changing heating element in Whirlpool dryer models requires careful preparation and attention to detail. You can complete this repair at home with the right tools, safety measures, and a step-by-step approach. Follow these instructions to ensure a safe and successful heating element replacement.
Safety Precautions
Before you begin, prioritize your safety. Working with electrical appliances involves risks, so you must take the following steps:
Unplugging the Dryer
Always unplug the dryer from the electrical outlet before starting any repair. This action eliminates the risk of electric shock. Never attempt to access the heating element while the appliance is connected to power.
Wearing Protective Gear
Wear protective gloves and safety goggles. These items protect your hands from sharp edges and your eyes from dust or debris. Handle electrical wires with care to avoid accidental disconnection or damage. You should also follow the manufacturer’s instructions closely during the process.
Mẹo: Double-check that the dryer is unplugged before you touch any internal components.
Tools and Parts Needed to Replace Heating Element
Gather all necessary tools and replacement parts before you start. Having everything ready streamlines the process and reduces the risk of mistakes.
List of Tools (Screwdriver, Nut Driver, Multimeter, Work Gloves)
- Multi screwdriver (for removing panels and securing screws)
- 1/4″ nut driver (for loosening and tightening nuts)
- Wire cutters (for cutting wires if needed)
- Wire splicing tool (for stripping and connecting wires)
- Multimeter (for testing electrical continuity)
- Work gloves (for hand protection)
- Safety goggles (for eye protection)
List of Replacement Parts (Whirlpool Dryer Heating Element, Thermal Fuse if needed)
- Whirlpool dryer heating element (factory-certified OEM part)
- Dryer heating element wire connector kit (may include wire connectors)
- Thermal fuse (replace if testing shows it is blown)
Ghi chú: Some heating element replacement kits include wire connectors. You may need to replace these if the originals show signs of wear.
Step-by-Step Guide: How to Replace Heating Element
You can follow these detailed steps to change the heating element in Whirlpool dryer models. This guide covers how to access the heating element, extract the element, and complete the installation.
Truy cập vào bộ phận làm nóng
- Unplug the dryer and put on your protective gear.
- Move the dryer away from the wall to reach the back panel.
- Use a screwdriver or nut driver to remove the screws securing the back panel.
- Carefully lift off the back panel to access the heating element assembly.
Removing the Old Element
- Locate the heating element near the bottom of the dryer.
- Mark or photograph the wiring connections for reference during reassembly.
- Disconnect the wires from the heating element terminals.
- Unscrew or unclip the mounting bracket that holds the heating element in place.
- Gently pull the element out of its housing. If the element feels stuck, wiggle it slightly to extract the element without damaging surrounding parts.
Báo động: Handle the heating element with care. The coils can be fragile and may break if bent or twisted.
Installing the New Element
- Insert the new heating element into the same position as the old one.
- Secure it with screws or clips, ensuring it sits firmly in the mounting bracket.
- Reconnect the wires according to your markings or reference photo.
- If your kit includes new wire connectors, use the wire splicing tool to attach them.
Reassembling the Dryer
- Replace the back panel and secure it with screws.
- Push the dryer back into position.
- Plug the dryer back into the electrical outlet.
- If you replaced the thermal fuse, double-check all connections before restoring power.
Mẹo: After you finish, run a short test cycle to confirm the dryer heats properly. If you notice any issues, unplug the dryer and review your work.
Changing heating element in Whirlpool dryer models does not require advanced repair skills. You can complete the process with novice experience if you follow each step carefully. Always extract the element gently and avoid forcing any parts. If you encounter difficulties, consult your Whirlpool manual or contact a professional for assistance.
Testing After Replacement
After installing a new heating element in your Whirlpool dryer, you need to verify that the repair succeeded. Careful testing ensures the appliance operates safely and efficiently. You can follow a systematic approach to confirm the heating element works as intended.
Chạy một chu kỳ thử nghiệm
Start by powering on the dryer and observing its behavior during the initial cycle. You want to ensure the machine runs smoothly and does not produce any unusual sounds or odors. These signs could indicate improper installation or a hidden issue.
Follow these steps to test your dryer after replacing the heating element:
- Plug the dryer into the electrical outlet.
- Select a standard drying cycle and press the start button.
- Listen for any abnormal noises, such as rattling or buzzing. These sounds may signal loose parts or incorrect assembly.
- Smell the air around the dryer. A faint odor is normal for a new heating element, but strong burning smells require immediate attention.
- Let the dryer run for several minutes. Monitor the drum rotation and airflow to confirm normal operation.
Mẹo: Stay near the dryer during the first test cycle. Quick action can prevent damage if you notice any problems.
Checking for Proper Heating
Once you confirm the dryer runs smoothly, you need to check for effective heat output. Proper heating ensures your laundry dries efficiently and the appliance remains safe to use.
Use the following checklist to verify the new heating element functions correctly:
- Place your hand near the dryer vent. You should feel a steady stream of warm air after a few minutes.
- Monitor the temperature inside the drum. The air should become noticeably warmer as the cycle progresses.
- Run a small load of laundry. Check that the clothes dry within a reasonable time frame, similar to the dryer’s performance before the heating issue.
- Observe the dryer for signs of overheating. The exterior should remain cool to the touch, and the cycle should complete without interruption.
- Repeat the drying cycle two or three times. Consistent heat output across multiple cycles confirms the repair’s success.
If you notice weak airflow, cool air, or extended drying times, you may need to recheck the installation. Sometimes, a loose wire or improper connection can prevent the heating element from working correctly.
Ghi chú: If the dryer overheats or fails to heat, unplug it immediately. Double-check all connections and consult your Whirlpool manual for troubleshooting guidance.
Testing your dryer after replacing the heating element helps you catch potential issues early. You protect your appliance and ensure your laundry dries efficiently.
Repair vs. Replace: Is It Worth Fixing Your Whirlpool Dryer?
Deciding whether to repair or replace your Whirlpool dryer requires careful consideration of costs, appliance age, and the nature of the issues you face. You want to make the best choice for your home and budget.
Cost of Replacing a Heating Element
Average Part and Labor Costs
When you need to replace a heating element in your Whirlpool dryer, you should expect to pay between $200 and $350 for professional service. The heating element part itself usually costs between $70 and $150, depending on whether you choose an OEM or generic version. Labor charges for appliance repair typically range from $60 to $150 per hour, and some technicians may add a service call fee. On average, you will spend about $230 for both parts and labor. These costs can vary based on your location, the model of your dryer, and the complexity of the repair.
DIY vs. Professional Repair
If you have basic tools and some confidence, you can save a significant amount by replacing the heating element yourself. The part alone often costs $90 or less, and the repair process is straightforward for most Whirlpool models. Professional repairs, however, can exceed $300 due to labor and service fees. By choosing the DIY route, you avoid high markups and only pay for the part and your time. For many homeowners, this makes DIY repair an attractive option, especially for common issues like a faulty heating element.
Tip: If you feel unsure about electrical repairs, hiring a professional ensures safety and proper installation.
When to Consider Replacing the Dryer
Age and Condition of the Dryer
You should consider the age of your Whirlpool dryer before investing in repairs. Most dryers last 10 to 13 years. If your appliance approaches or exceeds this range, replacement may offer better value. Older dryers often lack energy efficiency and modern features, and they may develop additional problems over time.
Frequency of Past Repairs
Frequent breakdowns signal that your dryer may be nearing the end of its useful life. If you have already repaired major components or faced recurring issues, further investment may not be wise. Repairs that cost more than half the price of a new dryer usually indicate that replacement is the smarter choice. Visible damage, such as rust or a cracked drum, also suggests it is time for a new appliance.
- Major failures like a broken drum or faulty control board often justify replacement.
- Electrical issues with burning smells pose safety risks and require immediate attention.
Making the Best Decision for Your Home
You should weigh several factors when deciding between repair and replacement:
- Age and physical condition of your Whirlpool dryer
- Total cost of repairs compared to the price of a new unit
- Energy efficiency and potential savings on utility bills
- Availability of replacement parts for your model
- Environmental impact of extending your appliance’s life
Consulting a qualified technician can help you assess your dryer’s condition and estimate repair costs. Simple repairs often make sense, but major or repeated issues may mean it is time to invest in a new, more efficient Whirlpool dryer.
Preventing Future Whirlpool Dryer Heating Problems
Keeping your whirlpool dryer in top condition requires regular attention and a proactive approach. You can prevent most heating problems by following a few essential maintenance steps and adopting smart usage habits.
Regular Cleaning and Maintenance
Routine cleaning and inspection help your dryer operate efficiently and safely. Neglecting these tasks can lead to overheating, reduced performance, or even fire hazards.
Cleaning the Lint Trap
You should clean the lint trap after every drying cycle. Lint buildup restricts airflow, which forces the dryer to work harder and increases the risk of overheating. Remove the lint screen, clear away all debris, and check for any residue that might block airflow. This simple habit extends the life of your appliance and improves drying efficiency.
Checking and Cleaning Vents
Proper airflow is critical for safe dryer operation. Every few months, inspect the vent hose for kinks or blockages. Lint and debris can accumulate in the vent system, reducing efficiency and creating a fire risk. Use a vacuum or a dryer vent cleaning brush to remove any buildup. If you notice longer drying times or a musty odor, clean the vent system immediately.
You can refer to the following table for a summary of recommended maintenance tasks:
| Nhiệm vụ bảo trì | Purpose/Reason | Safety/Additional Notes |
|---|---|---|
| Clean lint from blower wheel | Prevent lint buildup that obstructs airflow, reducing overheating | Unplug dryer before cleaning |
| Clean dryer vent system | Remove lint and obstructions to maintain proper airflow | Periodic cleaning recommended |
| Check for vent hose kinks | Ensure hot air escapes properly to avoid trapped heat | Inspect hose regularly |
| Inspect and replace blower wheel | Replace if wobbling to maintain efficient air movement | Requires opening machine; unplug first |
| Inspect and replace felt seals | Ensure proper heat seal to prevent heat loss and overheating | Replace if worn or missing |
Tip: Always unplug your dryer before performing any cleaning or maintenance inside the machine.
Avoiding Overloading the Dryer
You should avoid overloading your dryer. Large, heavy loads prevent hot air from circulating freely, which leads to uneven drying and increased wear on the heating element. Follow the manufacturer’s recommended load sizes. Smaller loads dry faster and place less strain on your whirlpool dryer, helping you avoid unnecessary repairs.
Scheduling Professional Inspections
Annual professional inspections keep your dryer running safely and efficiently. A trained technician can clean internal components, check for worn parts, and identify potential hazards before they become serious problems. If you use your dryer frequently, schedule vent duct and lint screen cleaning every six months.
- Schedule a professional inspection and cleaning of internal components once a year.
- Clean the lint screen and vent duct every six months if you use the dryer often.
These intervals help you maintain optimal performance and reduce the risk of fire hazards caused by lint buildup.
Note: Professional maintenance ensures your whirlpool dryer remains safe and efficient for years to come.
When to Call a Professional for Whirlpool Dryer Repairs
Signs You Need Expert Help
You may handle many dryer issues on your own, but some problems require a trained technician. Recognizing these warning signs helps you avoid costly damage and keeps your home safe.
- You notice persistent burning smells or unusual odors coming from your dryer. These odors often signal lint buildup or electrical faults, which can lead to fires if left unchecked.
- The control panel becomes unresponsive. When buttons stop working or the display fails to light up, you may face circuit board problems that go beyond basic troubleshooting.
- The dryer makes strange noises during operation. Rattling, grinding, or clanking sounds often point to issues with belts, motors, or imbalanced loads.
- The dryer fails to start, even when plugged in and set correctly. This symptom suggests internal faults that need professional attention.
- You see water leaks near the dryer. Damaged hoses, clamps, or valves may cause leaks that require expert repair.
- Clothes remain wet after a full cycle. Poor drying performance can result from clogged filters, blocked vents, or faulty thermal fuses.
Báo động: Continuing to use your dryer when these signs appear increases the risk of fire or further damage. Schedule a professional inspection right away if you notice any of these issues.
How to Find a Qualified Appliance Technician
Choosing the right technician ensures your dryer receives expert care. Look for these qualities when selecting a professional:
- Technicians with at least 10 years of experience in appliance repair bring valuable knowledge to every job.
- Factory and industry training, especially with brands like Whirlpool, shows a technician understands your specific model.
- Fully insured and bonded professionals offer reliability and peace of mind.
- Company-branded vehicles and uniforms signal professionalism and commitment to quality service.
- Fast, same-day, or emergency service options reduce your wait time and restore your dryer quickly.
- Clear communication about problems and costs helps you make informed decisions.
- Many reputable companies waive the service call fee if you approve the repair, which saves you money.
- Certified technicians demonstrate proven skills and a serious approach to their craft.
- A commitment to quality service that fits your budget ensures you receive value for your investment.
Mẹo: Always ask about certifications, insurance, and experience before hiring a technician. A qualified professional will diagnose and resolve dryer issues efficiently, keeping your home safe and your appliance running smoothly.
You can resolve most Whirlpool dryer heating issues with simple troubleshooting and timely repairs. Always put safety first when working on your dryer. DIY repairs carry risks, especially with electrical or gas components, so unplug the appliance and use proper tools. For complex problems, call a certified technician. Regular maintenance keeps your dryer running efficiently and extends its lifespan:
- Cleaning lint filters and vents prevents costly repairs.
- Proper usage and ventilation improve durability.
- Well-maintained dryers often last beyond 10 years.
Consistent care ensures your dryer provides reliable service for years.
Câu hỏi thường gặp
Why does my Whirlpool dryer run but not heat?
You likely have a faulty heating element, blown thermal fuse, or power supply issue. Check each component with a multimeter. Confirm your dryer receives 240 volts. Replace any defective parts to restore proper heating.
How often should I clean my dryer vent?
You should clean your dryer vent at least once a year. If you use your dryer frequently or notice longer drying times, clean it every six months. Regular cleaning prevents blockages and reduces fire risk.
Can I replace the heating element myself?
Yes, you can replace the heating element if you have basic tools and follow safety precautions. Always unplug the dryer before starting. Refer to your user manual for step-by-step instructions.
What does a blown thermal fuse indicate?
A blown thermal fuse usually signals overheating, often caused by blocked vents or a malfunctioning thermostat. Replace the fuse and address the root cause to prevent future failures.
How do I know if my dryer’s thermostat is bad?
Test the thermostat with a multimeter for continuity. If you see no continuity, the thermostat is faulty. Replace it to ensure your dryer heats correctly and operates safely.
Is it safe to use my dryer if it smells like burning?
Báo động: Stop using your dryer immediately if you smell burning. This odor often means lint buildup or electrical issues. Continuing to use the dryer increases fire risk. Schedule a professional inspection right away.
What should I do if my dryer keeps shutting off?
Check for overheating, blocked vents, or a faulty thermal fuse. Clean the vent system and replace any defective parts. If the problem persists, contact a qualified technician for further diagnosis.
How long should a Whirlpool dryer last?
Most Whirlpool dryers last 10 to 13 years with proper maintenance. Regular cleaning and timely repairs help extend your appliance’s lifespan.
