Aluminum Kettle Heating Plate

Product Applications

Home appliances: household electric kettles, instant hot water dispensers, health kettles, portable travel kettles.

Industrial equipment: commercial water boilers, hotel/hospital constant temperature kettles, laboratory high temperature cleaning equipment.

Product parameters​​

​​Power range​​:

Conventional models​​: 800W–2200W (suitable for ordinary electric kettles and health kettles).

​​High-power models​​: 2200W–3000W (commercial-grade fast-boiling kettles).

​​Customizable​​: Supports on-demand power adjustment (voltage and load requirements must be provided).

​​Working voltage​​:

Standard voltage​​: 110V/220V single-phase AC (global power grid compatible, error ≤±5%).

​​Resistance value​​:

Conventional models​​: 5Ω–15Ω (matched by power and voltage, error ≤±3%).

​​Working temperature​​:

Continuous stability​​: 200°C–300°C (surface temperature, high-temperature resistant coating protection).

​​Short-term peak​​: 350°C (need to customize ceramic fiber insulation layer).
​​Material​​:
Aviation-grade aluminum alloy 6063-T5, thermal conductivity ≥ 200W/m·K, lightweight design, is the base material.
Surface treatment options include Teflon (PTFE, anti-adhesion) or anodized layer (thickness 15μm, corrosion-resistant).

​​Dimensions​​:
​​Diameter/side length​​: Φ80mm–Φ200mm (round/square design).
​​Thickness​​: 3mm–8mm (adapted to embedded pot bottom design).
​​Service life​​:
​​Conventional model​​: 10,000–15,000 hours (based on daily usage frequency).
​​High-power model​​: 15,000–20,000 hours (enhanced heat dissipation and coating protection).

Core advantages of the product​​

​​High-efficiency thermal conductivity:
With a thermal conductivity of up to 200W/m·K, the aluminum alloy base material heats up to 100°C in 3 minutes and uses 15% less energy than conventional iron-chromium-aluminum heaters.
​​Precise temperature control​​:
Supports PID algorithm temperature control (±1°C accuracy), suitable for the constant temperature mode of smart health kettle (such as making tea, mixing milk powder).
​​Safe and durable​​:
The anodized layer is resistant to salt spray corrosion (test ≥500 hours), with a lifespan extended by 30%, suitable for humid kitchen environments.
​​Quick response​​:
No thermal inertia design, cools to a safe temperature within 30 seconds after power failure, and is suitable for high-frequency start-stop scenarios (such as continuous boiling water).
​​Easy to clean design​​:
Teflon coating resists scale/tea stain adhesion, reduces cleaning frequency by 60%, and complies with FDA food contact certification.
​​Lightweight adaptation​​:
The substrate density is 2.7g/cm³, which is 40% lighter than stainless steel, and is suitable for embedded small appliance design.