The thin film heater uses a ceramic substrate and sputtering process to deposit a metal thin film resistor layer, integrates a PID temperature control module, achieves extremely fast heating in 1-3 seconds, energy efficiency ≥97%, an operating temperature range of 20℃-300℃, supports ultra-thin design (thickness ≤1.5mm) and flexible circuit adaptation, has IPX6 waterproof and corrosion resistance, and a lifespan of more than 50,000 hours, meeting the needs of high-precision and miniaturized heating.
Минимальный объем заказа: 1000
Срок поставки: 15-25 дней
Расположение фабрики: Чжуншань, Гуандун, Китай
Portable coffee machine, beauty instrument, medical thermostat, laboratory micro-heating plate, semiconductor dispensing machine, drone battery thermal management, smart wearable device heating components, industrial micro-spraying system.
Power density:
Conventional range: 0.1–1.5 W/cm² (customizable local high power areas, such as sensor heating).
Limit value: 2.0 W/cm² (needs heat dissipation design, such as forced air cooling).
Operating voltage: DC 5V–400V (supports low voltage precision control, such as wearable devices).
Operating temperature: Continuous stability: 50°C–200°C (surface temperature, long-term use).
Short-term peak: 300°C (requires high temperature resistant substrate, such as ceramic).
Heating speed: 5–30 seconds to reach the set temperature (no thermal inertia, response speed is 2–3 times faster than thick film).
Material and structure:
Substrate: Polyimide (PI) flexible film (bendable, curvature radius ≥1mm) or ceramic substrate (aluminum oxide/aluminum nitride).
Heating layer: metal (molybdenum, tantalum) or ceramic (titanium nitride) film (thickness 0.1–5μm).
Protective layer: SiO₂/Si₃N₄ insulating layer (moisture-resistant and corrosion-resistant).
Service life: ≥20,000 hours (no mechanical loss, life is 2–3 times longer than thick film).
Customizable: Special-shaped cutting (circular, special-shaped circuit boards), integrated temperature sensor (NTC/PTC).
Ultra-thin and flexible: The substrate thickness is 0.05–0.5mm and can fit curved surfaces (such as smart watch straps, medical patches).
Precise temperature control: PID algorithm supports ±0.1°C accuracy (suitable for laboratory constant temperature and medical equipment).
Quick response: Heating to 100°C within 5 seconds (50% more efficient than traditional heaters).
Corrosion resistance:
Ceramic/metal film is acid and alkali resistant (suitable for chemical pipeline heating and marine environment).
Lightweight design:
The weight is 60% lighter than thick film heaters, suitable for drones and portable devices.
Safe and reliable:
Automatic power off in case of overheating (trigger temperature can be set, such as automatic protection at >250°C).
Long life:
No mechanical wear, life is more than 3 times longer than alloy wire heaters.
Если вы предоставите точную информацию о параметрах спроса, мы сможем предоставить вам предложение не ранее чем через 24 часа.
Это списки часто задаваемых нашими клиентами вопросов. Каждому вопросу соответствует краткий ответ, охватывающий такие аспекты, как продукция, качество и услуги. Если у вас есть другие вопросы, пожалуйста, оставьте сообщение для консультации. Спасибо.
Получите индивидуальное предложение менее чем за два дня.
