mug heating plate

Применение продуктов

Home appliances: mug heater, portable health pot, coffee cup insulation pad, mini electric cooker.

Product parameters

Диапазон мощности:

Conventional model: 300W–800W (suitable for household mugs and thermos cups).

Portable model: 150W–300W (outdoor camping cups, mini coffee cups).

Customizable: Supports power adjustment on demand (cup size and voltage requirements must be provided).

Рабочее напряжение:

Standard voltage: 110V/220V single-phase AC (global power grid compatible, error ≤±5%).

Low voltage adaptation: 12V/24V DC (suitable for vehicle power supply, solar power supply system).

Значение сопротивления:

Conventional model: 10Ω–30Ω (matching power and voltage, error ≤±3%).

Рабочая температура:

Continuous stability: 60°C–120°C (surface temperature, anti-scalding coating protection).

Short-term peak: 150°C (customized ceramic fiber insulation layer required).
​​Material​​:
​​Base material​​: Food-grade aluminum alloy 6063-T5 (thermal conductivity ≥ 200W/m·K, lightweight design).
​​Surface treatment​​: Teflon (PTFE, anti-adhesion) or ceramic coating (high temperature resistant to 300°C).
​​Dimensions​​:
​​Applicable cup type​​: diameter Φ60mm–Φ120mm (round/square design, suitable for conical/cylindrical cup bottom).
​​Thickness​​: 1.5mm–3mm (ultra-thin embedding, seamless fit to the curvature of the cup bottom).
​​Service life​​:
​​Conventional model​​: 8,000–12,000 hours (based on daily frequency of use).
​​Portable model​​: 12,000–15,000 hours (low-load operation).

Product Core Advantages​​

​​Safety and Anti-scalding​​:
​​Teflon coating surface temperature ≤45°C (anti-scalding design), in line with FDA food contact certification, suitable for children/elderly use scenarios.
​​Precise temperature control​​:
​​Supports PID algorithm temperature control (±1°C accuracy), suitable for constant temperature insulation (such as coffee/tea insulation) or fast heating mode.
​​Lightweight adaptation​​:
​​The density of the aluminum alloy substrate is 2.7g/cm³, which is 50% lighter than stainless steel, suitable for portable mugs and camping equipment.
​​Efficient thermal conductivity​​:
​​The thermal conductivity of aluminum alloy is 200W/m·K, and it heats up to 60°C within 3 minutes, and the energy consumption is 25% lower than that of traditional resistance wire.
​​Multi-scenario compatibility​​:
​​Supports 12V/24V DC input, suitable for vehicle power supply, solar power supply system and outdoor portable equipment.
​​Ultra-thin design​​:
The thickness is only 1.5mm-3mm, seamlessly embedded in the bottom of the special-shaped cup, with a thermal efficiency of more than 90%, suitable for special-shaped cups (such as conical mugs).