Heating Element for Coffee Maker——Intelligent Temperature Control Embedded Coffee Heating Solution
Embedded heating element designed for espresso machines, drip coffee machines and hand brewing utensils, adopts 316L stainless steel + ceramic coating heat conduction structure, suitable for 300W-2000W power range, temperature resistance up to 350℃ (short time), thermal response time ≤15 seconds.
MOQ：1000PCS
Délai de livraison：25 jours
Emplacement de l'usine : Zhongshan, Guangdong, Chine
Power Range:
Home drip coffee makers range from 500 to 1500 watts—for example, drip machines or pour-over brewers.
Espresso machines: 1.2kW–5kW (residential); 5kW–15kW (commercial).
Pod machines: 800W to 1800W (e.g., Nespresso, Keurig).
Voltage Compatibility:
Global use of 110V/220V single-phase AC; error ≤±5%
Matériau :
Heating element: self-limiting PTC ceramic or nickel-chromium (NiCr) alloy (high-temperature oxidation resistance).
Stainless steel 316L (corrosion-resistant) or aluminium thermoblock (lightweight) make up Boiler/ThermoBlock.
Coating: ceramics (non-stick, anti-calcification) or Teflon (PTFE, anti-stick).
Temperature Control:
PID algorithm (±0.5°C accuracy for espresso brewing).
Dual thermostats (separate brewing and steam circuits).
Recovery Time:
Home Machines: 30–60 seconds (after pulling a shot).
Commercial Machines: <15 seconds (e.g., La Marzocco Linea PB).
Dimensions :
Boiler/Thermoblock: Φ50mm–Φ150mm, length 100mm–500mm.
Heating Plates (drip machines): 100mm–300mm diameter.
Lifespan:
10,000–50,000 hours (NiCr) / 20,000–80,000 hours (PTC ceramic).
Precision Brewing:
PID-Controlled Systems: Maintain 92°C–96°C (±0.5°C) for optimal extraction.
Pre-Infusion: Gradual pressure build-up (5–10 bar) for even coffee grounds saturation.
Energy Efficiency:
Inverter Technology: Reduces standby power by 30% (e.g., ECM pump systems).
Low-Power Modes: Auto-shutdown after 1-hour idle.
Durability:
Stainless Steel Boilers: Resist scaling and corrosion (ideal for hard water areas).
PTC Ceramic Elements: Self-limiting design prevents overheating (no external thermostat needed).
Safety Features:
Overheat Protection: Automatic shutdown at >120°C (CE/UL certified).
Water Level Sensors: Prevent dry boiling (IPX7 waterproofing).
Versatility:
Steam Wand: Generates microfoam for latte art (adjustable pressure: 0.5–1.5 bar).
Dual Use: Brewing + steaming (HX systems in espresso machines).
Drip Coffee Makers:
Heating Plate: Aluminum or stainless steel plate (150W–800W), direct contact with drip tray.
Example: Bonavita 1900TS (1500W, PID-controlled plate).
Espresso Machines:
Boiler Systems: Stainless steel 316L boiler (1.8kW–5kW) with NiCr heating elements.
Thermoblock Systems: Aluminum block (1.2kW–1.8kW) for rapid heat transfer.
Example: DeLonghi Dedica EC685 (thermoblock, 15-second heat-up).
Pod Machines:
Compact Heating Elements: 800W–1200W PTC ceramic for quick pod brewing.
Example: Nespresso Creatista Plus (1350W, milk frother with steam wand).
Commercial Machines:
High-Flow Boilers: 15kW+ stainless steel boilers (e.g., La Pavoni Europiccola).
Heat Exchanger (HX) Systems: Dual-purpose coils for brewing + steaming.
Si vous nous fournissez des informations précises sur les paramètres de la demande, nous pourrons vous donner un devis dans les 24 heures au plus tôt.
Il s'agit de listes de questions fréquemment posées par nos clients. À chaque question correspond une brève réponse, couvrant des aspects tels que les produits, la qualité et les services. Si vous avez d'autres questions, veuillez laisser un message pour consultation. Nous vous remercions de votre attention.
Obtenez un devis personnalisé en moins de deux jours.
