Aluminum Kettle Heating Plate – Lightweight and fast heating solution
The high-efficiency aluminum heating element designed for home, commercial and outdoor scenes is suitable for 800W-2500W power range, thermal conductivity ≥237W/m·K, temperature resistance up to 300℃ (short time), thermal response time ≤12 seconds; integrated PID dynamic temperature control algorithm (±0.5℃ accuracy), supports anti-dry burning protection (＞10 seconds automatic power off) and pulse steam self-cleaning technology (scale removal rate ＞90%), passed CE/LFGB/RoHS certification, 40% lighter than traditional stainless steel heating plates, and life span ＞120,000 cycles. It is suitable for home fast heating, commercial multi-kettle parallel connection and outdoor emergency scenes, and supports stable operation in extreme environments (-20℃~450℃).
MOQ：1000PCS
Plazo de entrega：25días
Ubicación de la fábrica: Zhongshan, Guangdong, China
Home appliances: household electric kettles, instant hot water dispensers, health kettles, portable travel kettles.
Industrial equipment: commercial water boilers, hotel/hospital constant temperature kettles, laboratory high temperature cleaning equipment.
Power range:
Conventional models: 800W–2200W (suitable for ordinary electric kettles and health kettles).
High-power models: 2200W–3000W (commercial-grade fast-boiling kettles).
Customizable: Supports on-demand power adjustment (voltage and load requirements must be provided).
Working voltage:
Standard voltage: 110V/220V single-phase AC (global power grid compatible, error ≤±5%).
Resistance value:
Conventional models: 5Ω–15Ω (matched by power and voltage, error ≤±3%).
Working temperature:
Continuous stability: 200°C–300°C (surface temperature, high-temperature resistant coating protection).
Short-term peak: 350°C (need to customize ceramic fiber insulation layer).
Material:
Aviation-grade aluminum alloy 6063-T5, thermal conductivity ≥ 200W/m·K, lightweight design, is the base material.
Surface treatment options include Teflon (PTFE, anti-adhesion) or anodized layer (thickness 15μm, corrosion-resistant).
Dimensions:
Diameter/side length: Φ80mm–Φ200mm (round/square design).
Thickness: 3mm–8mm (adapted to embedded pot bottom design).
Service life:
Conventional model: 10,000–15,000 hours (based on daily usage frequency).
High-power model: 15,000–20,000 hours (enhanced heat dissipation and coating protection).
High-efficiency thermal conductivity:
With a thermal conductivity of up to 200W/m·K, the aluminum alloy base material heats up to 100°C in 3 minutes and uses 15% less energy than conventional iron-chromium-aluminum heaters.
Precise temperature control:
Supports PID algorithm temperature control (±1°C accuracy), suitable for the constant temperature mode of smart health kettle (such as making tea, mixing milk powder).
Safe and durable:
The anodized layer is resistant to salt spray corrosion (test ≥500 hours), with a lifespan extended by 30%, suitable for humid kitchen environments.
Quick response:
No thermal inertia design, cools to a safe temperature within 30 seconds after power failure, and is suitable for high-frequency start-stop scenarios (such as continuous boiling water).
Easy to clean design:
Teflon coating resists scale/tea stain adhesion, reduces cleaning frequency by 60%, and complies with FDA food contact certification.
Lightweight adaptation:
The substrate density is 2.7g/cm³, which is 40% lighter than stainless steel, and is suitable for embedded small appliance design.
Si puede facilitarnos información precisa sobre los parámetros de la demanda, podremos darle un presupuesto en 24 horas como muy pronto.
Estas son listas de preguntas frecuentes de nuestros clientes. A cada pregunta corresponde una breve respuesta, que abarca aspectos como productos, calidad y servicios. Si tiene otras preguntas, deje un mensaje para consultarlas. Muchas gracias.
Obtenga un presupuesto personalizado en menos de dos días.
